AudioCodes Mediant MSBR Series User Manual

Version 7.2 763 Mediant MSBR
Reference Guide 76 Security
76.3.2.6 napt
This command sets the NAPT (Network Address Port Translation) on the specified tunnel
interface. Use the no form of this command to set route mode.
Syntax
napt
Default
By default, NAPT is used.
Command Mode
Privileged User
Example
This example sets napt on l2tp 6.
(conf-if-L2TP 6)# napt
76.3.2.7 ppp user
This command defines the ppp username and password on the specified tunnel interface.
Syntax
ppp user <username> pass <password>
Command Description
Username Defines the ppp username.
password Defines the ppp password.
Default
NA
Command Mode
Privileged User
Example
This example sets the username and password on interface l2tp 6.
(conf-if-L2TP 6)# ppp user admin pass 1234

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English