AudioCodes Mediant MSBR Series User Manual

Version 7.2 713 Mediant MSBR
Reference Guide 75. Layer-3 Commands
75.2.2.80 OSPF6 Protocol
The following describes OSPF protocol for IPv6 commands.
75.2.2.80.1 router ospf6
This command enables or disables the OSPF6 process.
Syntax
router ospf6 [vrf <VRF name>]
no router ospf
Command Description
VRF name Defines the VRF name.
Default
NA
Command Mode
Privileged User
Example
This example enables the OSPF6 process.
(config-data)# router ospf6
75.2.2.80.2 area
This command filters OSPFv6 area parameters.
Syntax
area a.b.c.d filter-list prefix <ipv6 prefix-list name> {in|out}
area a.b.c.d range [X:X::X:X/M] [advertise|not-advertise]
Command Description
a.b.c.d Defines the OSPFv6 area in IP address format.
filter-list Filter networks between OSPFv6 areas.
prefix Filter prefixes between OSPFv6 areas.
ipv6 prefix-list name Defines the name of an IPv6 prefix-list
range Defines the configured address range.
in The IPv6 prefix list is applied to IPv6 prefixes advertised to
the relevant area from other areas.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English