AudioCodes Mediant MSBR Series User Manual

Version 7.2 327 Mediant MSBR
Reference Guide 53. static
53 static
This command configures the Static Routes table, which lets you define static IP routing rules.
Syntax
(config-network)# static <Index>
(static-<Index>)#
Command Description
description
Configures a name for the rule.
destination
Configures the IP address of the destination host/network.
device-name
Associates an IP network interface through which the static
route's Gateway is reached. The association is done by
assigning the parameter the same Ethernet Device that is
assigned to the IP network interface in the IP Interfaces
table.
gateway
Configures the IP address of the Gateway (next hop) used
for traffic destined to the subnet/host defined in
'destination' / 'prefix-length'.
prefix-length
Configures the Classless Inter-Domain Routing (CIDR)-
style representation of a dotted-decimal subnet notation of
the destination host/network.
Command Mode
Privileged User
Example
This example configures a static routing rule to specify the gateway (10.15.7.22) to reach
10.1.1.10:
(config-network)# static
(static-0)# destination 10.1.1.0
(static-0)# prefix-length 24
(static-0)# device-name vlan1
(static-0)# gateway 10.15.7.22

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English