AudioCodes Mediant MSBR Series

Reference Guide 184 Document #: LTRT-17939
Mediant MSBR
7.14 clear voip
This command deletes VoIP-related information.
Syntax
# clear voip {calls|register|statistics}
Command Description
calls
See Section 7.14.1.
ids blacklist
See Section 7.14.2
register
See Section 7.14.3.
statistics
See Section 7.14.4.
Command Mode
Privileged User
7.14.1 clear voip calls
This command deletes all active calls.
Syntax
# clear voip calls [<Session ID>]
Command Description
- If Session ID isn't specified, all active VoIP calls are cleared.
Session ID (Optional) If Session ID is specified, the specified call is cleared.
Command Mode
Privileged User
Related Commands
show voip calls active
Example
Displaying and then clearing VoIP calls:
# show voip calls
Total Active Calls: 1
| Session ID | Caller | Callee | Origin
| Remote IP |End Point Type |Duration|Call State
==================================================================
===========================================================