AudioCodes Mediant MSBR Series

Reference Guide 106 Document #: LTRT-17939
Mediant MSBR
6.3.10 show data debugging
This command displays debugging information.
Syntax
show data debugging
Command Description
bgp
Displays debugging information about BGP.
ospf
Displays debugging information about OSPF.
ospf6
Displays debugging information about OSPF6.
rip
Displays debugging information about Routing
Information Protocol (RIP) which enables routing
information to be exchanged between routers.
ripng
Displays debugging information about Next Generation
Routing Information Protocol (RIP), defined in RFC 2080.
vrf <VRF Table
Name>
Displays debugging information for a specified Virtual
Routing and Forwarding (VRF) table.
zebra
Displays debugging information about Zebra routing
software which provides TCP/IP based routing services
with support from routing protocols RIP, OSPF and BGP
(see above). Zebra also supports IPv4 and IPv6 routing
protocols.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays debugging information about BGP:
show data debugging bgp
BGP debugging status:
BGP events debugging is on
BGP keepalives debugging is on
BGP updates debugging is on (outbound)
BGP fsm debugging is on
BGP filter debugging is on
BGP zebra debugging is on
This example displays debugging information about Zebra:
show data debugging zebra
Zebra debugging status:
Zebra event debugging is on