Version 7.2 511 Mediant MSBR
Reference Guide 73. WAN Access Commands
73.2.11 sms
This command provides support for sending an SMS text message through a 3G cellular
connection. Cellular connectivity is achieved by attaching a third-party, 3G cellular modem to
the device's USB port.
Syntax
sms <mobile number> "<message text>"
Command Description
<mobile number> Defines the destination phone number.
<message text> Defines the message text which can include up to 127
characters and must be enclosed in double quotes (").
Note
This command is applicable only to data-router functionality.
Command Mode
Privileged User
Example
This example sends a text message to a mobile phone.
(config-data)# interface cellular 0/0
(conf-cellular)# shutdown
(conf-cellular)# sms 0546342171 "Hello John Doe!"