AudioCodes Mediant MSBR Series

Version 7.2 435 Mediant MSBR
Reference Guide 66. qoe
66 qoe
This command configures Quality of Experience (QoE).
Syntax
(config-voip)# qoe
Command Description
bw-profile
See Section 66.1.
call-flow-report
See Section 66.2
qoe-profile
See Section 66.3.
quality-of-service-rules
See Section 66.4.
settings
See Section 66.5.
Command Mode
Privileged User
66.1 bw-profile
This command configures the Bandwidth Profile table, which lets you define Bandwidth
Profiles.
Syntax
(config-voip)# qoe bw-profile <Index>
(bw-profile-<Index>)#
Command Description
egress-audio-bandwidth
Defines the major (total) threshold for outgoing audio traffic
(in Kbps).
egress-video-bandwidth
Defines the major (total) threshold for outgoing video traff
ic
(in Kbps).
generate-alarms
{disable|enable}
Enables the <device> to send an SNMP alarm if a
bandwidth threshold is crossed.
hysteresis
Defines the amount of fluctuation (hysteresis) from the
configured bandwidth threshold in order for the threshold
to be considered as crossed (i.e., avoids false reports of
threshold crossings).
ingress-audio-
bandwidth
Defines the major (total) threshold for incoming audio
traffic (in Kbps).
ingress-video-
bandwidth
Defines the major (total) threshold for incoming video
traffic (in Kbps).