AudioCodes Mediant MSBR Series

Reference Guide 212 Document #: LTRT-17939
Mediant MSBR
Command Description
verify-ssl-subject
-
name {off|on}
Enables verification of the SSL Subject Name in the server's
certificate when using HTTPS.
Command Mode
Privileged User
10.1 Files
This command automatically uploads specified files to the device from a remote server.
Syntax
(config-system)# automatic-update
(auto-update)#
Command Description
auto-firmware
Configures the URL path to a remote server from where
the software file (.cmp) can be loaded. This is based on
timestamp.
call-progress-tones
Configures the URL path to a remote server from where
the Call Progress Tone (CPT) file can be loaded.
cas-table
Configures the URL path to a remote server from where
the Channel Associated Signaling (CAS) file can be
loaded.
cli-script
Configures the URL path to a remote server from where
the CLI Script file can be loaded.
dial-plan
Configures the URL path to a remote server from where
the Dial Plan file can be loaded.
feature-key
Configures the URL path to a remote server from where
the License Key file can be loaded.
firmware
Configures the URL path to a remote server from where
the software file (.cmp) file can be loaded.
Note: This is a one-time file update; once loaded, the
device does not load it again.
prerecorded-tones
Configures the URL path to a remote server from where
the Prerecorded Tone file can be loaded.
startup-script
Configures the URL path to a remote server from where
the Startup Script file can be loaded.
tls-cert
Configures the URL path to a remote server from where
the TLS certificate file can be loaded.
tls-private-key
Configures the URL path to a remote server from where
the TLS private key file can be loaded.
tls-root-cert
Configures the URL path to a remote server from where
the TLS root CA file can be loaded.