AudioCodes Mediant MSBR Series

Reference Guide 68 Document #: LTRT-17939
Mediant MSBR
5.14 debug dot11radio
This command configures debugging the functioning of the router's wireless module.
Syntax
# debug dot11radio
Command Description
ath-debug
Configures debugging Atheros Communications Inc.
wireless module.
 aggr-mem (Aggregated packets memory handling)
 beacon (Beacon handling)
 bt-coex (BT coexistence)
 calibrate (Periodic calibration)
 cwm (Channel width management)
 dcs Dynamic (channel switch)
 fatal-error (Fatal errors)
 greenap (Green AP)
 htc-wmi (HTC/WMI)
 keycache (Key cache management)
 mat MAT (for ProxySTA)
 node (Node management)
 power-save (PS Poll and PS save)
 ppm (PPM management)
 rate Rate (control)
 recv (Basic RX operation)
 reset (Reset processing)
 scan (Scan)
 state (802.11 state transitions)
 swr (SwRetry mechanism)
 uapsd (UAPSD)
 watchdog (Watchdog timeout)
 xmit (Basic TX operation)
ieee80211-debug
VAP and protocol-related messages.
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example configures debugging the power save function of the router's Atheros
Communications Wi-Fi driver:
# debug dot11radio ath-debug power-save