AudioCodes Mediant MSBR Series

Reference Guide 66 Document #: LTRT-17939
Mediant MSBR
Command Description
SIP signaling messages, Syslog messages, CDRs, and the
<device>'s internal processing messages
signaling-media
Configures the debug recording capture type as signaling and
media.
The debug recording includes signaling, Syslog
messages, and media (RTP/RTCP/T.38).
signaling-media-
pcm
Configures the debug recording capture type as signaling,
media and PCM.
The debug recording includes SIP signalling
messages, Syslog messages, media, and PCM
(
voice signals
from and to TDM).
status
Displays the debug recording status.
Command Mode
Privileged User
Example
Displaying the debug recording status:
# debug debug-recording status
Debug Recording Configuration:
==============================
Debug Recording Destination IP: 10.33.5.231
Debug Recording Destination Port: 925
Debug Recording Status: Stop
Logging Filter Configuration (line 0):
======================================
Filter Type: Any
Value:
Capture Type: Signaling
Log Destination: Syslog Server
Mode: Enable
5.11 debug dhcpv6_client
This command configures debugging the functioning of the Dynamic Host Configuration
Protocol (DHCP) version 6 client.
Syntax
# debug dhcpv6_client
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.