AudioCodes Mediant MSBR Series

Version 7.2 285 Mediant MSBR
Reference Guide 38. Introduction
38 Introduction
This part describes the commands located on the Network configuration level. The
commands of this level are accessed by entering the following command at the root prompt:
Syntax
# configure network
(config-network)#
This level includes the following commands:
 access-list (see Section 39)
 bind (see Section 40)
 dhcp-server (see Section 41)
 dns (see Section 42)
 hostname (see Section 43)
 http-proxy (see Section 44)
 interface (see Section 45)
 nat-translation (see Section 46)
 network-dev (see Section 47)
 network-settings (see Section 48)
 nqm (see Section 49)
 poe (see Section 50)
 qos (see Section 51)
 security-settings (see Section 52)
 static (see Section 53)
 tftp (see Section 54)