AudioCodes Mediant MSBR Series - Debug Ospf

Reference Guide 5. Debug Commands
Version 7.2 75 Mediant MSBR
5.21 debug ospf
This command debugs Open Shortest Path First (OSPF) routing protocol for Internet Protocol
(IP) networks.
Syntax
# debug ospf
Command Description
event
Displays OSPF event information.
ism {events|status|timers}
Debugs the OSPF Interface State Machine
(ISM Event Information, ISM Status Information
and ISM TImer Information).
lsa
{flooding|generate|install|
refresh}
Debugs the OSPF Link State Advertisement
(LSA Flooding, LSA Generation, LSA
Install/Delete and LSA Refresh).
nsm {events|status|timers}
Debugs the OSPF Neighbor State Machine
(NSM Event Information, NSM Status
Information and NSM Timer Information).
nssa
Debugs the OSPF NSSA (Not-So-Stubby
Area), a non-proprietary extension of the
existing stub area feature that allows external
routes to be injected in a limited fashion into the
stub area.
See http://www.ietf.org/rfc/rfc1587.txt for more
information.
packet {all|dd|hello|ls-
ack|ls-request|ls-update}
{detail|recv|send}
Debugs the OSPF packets (detailed
information, packets received or packets sent).
Packets can be all, database (dd), hello, link
state acknowledgement, link state request or
link state update).
zebra
{interface|redistribute}
Debugs the OSPF Zebra routing software
which provides TCP/IP based routing services
with support from routing protocol OSPF.
Command Mode
Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays OSPF event information:
# debug ospf event