AudioCodes Mediant MSBR Series User Manual

Version 7.2 535 Mediant MSBR
Reference Guide 73. WAN Access Commands
Command Description
‘no’ at prefix of command Disables MS-CHAP on this PPP/MLP serial interface.
Default
By default, MS-CHAP is enabled.
Command Mode
Privileged User
Example
This example enables MS-CHAP:
(conf-if-serial-ppp 0/0)# authentication ms-chap
73.4.15.11 authentication ms-chap2 (PPP/MLP over T1)
This command enables Microsoft Challenge Handshake Authentication Protocol Version 2
(MS-CHAP2) to be used by this PPP/MLP serial interface.
Syntax
authentication ms-chap2
Command Description
‘no’ at prefix of command Disables MS-CHAP2 on this PPP/MLP serial interface.
Default
By default, MS-CHAP2 is enabled.
Command Mode
Privileged User
Example
This example describes MS-CHAP2:
(conf-if-serial-ppp 0/0)# authentication ms-chap2
73.4.15.12 authentication username (PPP/MLP over T1)
This command sets the username to be used by this PPP/MLP serial interface during the
authentication phase of the PPP negotiation.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English