AudioCodes Mediant MSBR Series User Manual

Reference Guide 394 Document #: LTRT-17939
Mediant MSBR
Command Description
probability-on-qos-
problem
If QoS problem, a call has this probability (in percentage)
to continue to reevaluate the QoS.
redir-nb-si-to-tel
Override screening indicator value of the redirect number
in Setup messages to PSTN interface..
src-ip-addr-input
Source IP address input.
src-manipulation
Describes the hdrs containing source nb after
manipulation.
tel-dial-plan-name
Assigns a Dial Plan (by name) for tag-based IP-to-Tel
routing rules.
tel2ip-rte-mode
Defines order between routing incoming calls from Tel
side and performing manipulations.
tgrp-routing-prec
TGRP Routing Precedence.
trk-id-as-prefix
Add Trunk/Port as nb prefix.
trkgrpid-prefix
Add Trunk Group ID as prefix.
Command Mode
Privileged User
59.6.7 tel2ip-routing
This command configures the Tel-to-IP Routing table, which lets you define Tel-to-IP routing
rules.
Syntax
(config-voip)# gateway routing tel2ip-routing <Index>
(tel2ip-routing-<Index>)#
Command Description
call-setup-rules-set-
id
Assigns a Call Setup Rule Set ID to the routing rule.
charge-code-name
Assigns a Charge Code to the routing rule for generating
metering pulses (Advice of Charge).
cost-group-id
Assigns a Cost Group to the routing rule for determining
the cost of the call (i.e., Least Cost Routing or LCR).
dest-ip-group-name
Assigns an IP Group to where you want to route the call.
dest-sip-interface-
name
Assigns a SIP Interface to the routing rule.
dst-ip-address
Defines the IP address (in dotted-decimal notation or
FQDN) to where the call is sent.
dst-phone-pattern
Defines the prefix and/or suffix of the called (destination)
telephone number.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English