AudioCodes Mediant MSBR Series User Manual

Reference Guide 200 Document #: LTRT-17939
Mediant MSBR
8.9 pstn nfas-group-switch-activity
This command initiates a manual switchover between D-channels (primary and backup)
pertaining to the same Non-Facility Associated Signaling (NFAS) group.
Syntax
# pstn nfas-group-switch-activity [ NFAS Group Number ]
Command Description
NFAS Group Number Configures the NFAS group number (1-12).
Note
The command is applicable only devices supporting digital PSTN interfaces.
Command Mode
Privileged User
Example
# pstn nfas-group-switch-activity 2
8.10 reload
This command resets the device with or without saving the configuration to flash memory.
Syntax
# reload {if-needed|now|without-saving [in <Minutes>]}
Command Description
if-needed
Resets the device only if you have configured a parameter
that requires a device reset to take effect.
now
Resets the device and saves the configuration (including
Auxiliary files) to flash memory.
without-saving
Resets the device without saving the configuration to flash
memory.
 in (Configures the number of minutes that will lapse
before the device is reset. Use before making changes
to sensitive settings. If your changes cause the device
to lose connectivity, wait for the device to restart with
the previous working configuration. To cancel the timed
restart, use the
no reload
command).
Default
When the command is run, the configuration is saved to flash memory.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English