AudioCodes Mediant MSBR Series User Manual

Reference Guide 542 Document #: LTRT-17939
Mediant MSBR
73.5 Backup Group Commands
The commands below describe Backup Group.
73.5.1 backup-group
A backup group defines a set of interfaces so that only one of the interfaces is active at any
given moment. Other interfaces in the group are automatically disabled.
By default, the interface marked as "priority 1" will be activated; if the active interface loses
connectivity, the device attempts to bring up the next interface in the group. As soon as the
higher-priority interface regains connectivity, the lower-priority interface will be disabled.
To associate interfaces with a backup group, use the "backup monitoring group" command
in interface context.
Syntax
backup-group <group-name> [ primary-wan ]
description <desc-text>
exit
Command Description
group-name Defines the name of the backup group.
primary-wan Marks the group as controlling the primary WAN connection. This
setting affects SIP connectivity; when the primary WAN interface
changes, registration will be performed via the new interface. This is an
optional field.
desc-text A description of the backup group.
Default
By default, no backup groups are defined.
Command Mode
Privileged User
Example
This example defines a backup group:
(config-data)# backup-group abc primary-wan
(backup-group)# description WAN-group

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English