AudioCodes Mediant MSBR Series

Reference Guide 5. Debug Commands
Version 7.2 85 Mediant MSBR
5.30 debug sip
This command configures SIP debug level.
Syntax
# debug sip {[<Debug Level>]|status}
Command Description
Debug Level Configures the SIP debug level:
 0 = (No debug) Debug is disabled and Syslog messages are
not sent.
 1 = (Basic) Sends debug logs of incoming and outgoing SIP
messages.
 5 = (Detailed) Sends debug logs of incoming and outgoing SIP
messages as well as many other logged processes.
status
Displays the current debug level.
Note
 If no level is specified, level 5 is used.
 Typing no debug sip configures the level to 0.
Command Mode
Privileged User
Example
Setting the SIP debug level to 5:
# debug sip 5