AudioCodes Mediant MSBR Series User Manual

Reference Guide 156 Document #: LTRT-17939
Mediant MSBR
6.11 show users
This command displays and terminates users that are currently logged into the device's CLI
and applies to users logged into the CLI through RS-232 (console), Telnet, or SSH.
For each logged-in user, the command displays the type of interface (console, Telnet, or
SSH), user's username, remote IP address from where the user logged in, and the duration
(days and time) of the session. Each user is displayed with a unique index (session ID).
Syntax
show users
Command Mode
Basic User and Privileged User
Note
The device can display management sessions of up to 24 hours. After this time, the duration
counter is reset.
Example
Displaying all active calls:
show users
[0] console Admin local 0d00h03m15s
[1] telnet John 10.4.2.1 0d01h03m47s
[2]* ssh Alex 192.168.121.234 12d00h02m34s
The current session from which the show command was run is displayed with an asterisk (*).

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English