Version 7.2 209 Mediant MSBR
Reference Guide 9. Introduction
9 Introduction
This part describes the commands located on the System configuration level. The commands
of this level are accessed by entering the following command at the root prompt:
Syntax
# configure system
(config-system)#
This level includes the following commands:
automatic-update (see Section 10)
cli-settings (see Section 11)
clock (see Section 12)
configuration-version (see Section 13)
cwmp (see Section 14)
feature-key (see Section 14)
floating license (see Section 16)
http-services (see Section 17)
ldap (see Section 18)
mgmt-access-list (see Section 19)
mgmt-auth (see Section 20)
ntp (see Section 21)
packetsmart (see Section 22)
performance-profile (see Section 23)
radius (see Section 24)
snmp (see Section 25)
user (see Section 26)
web (see Section 27)
welcome-msg (see Section 28)