AudioCodes Mediant MSBR Series User Manual (English)

To Next Page

To Previous Page

Reference Guide 524 Document #: LTRT-17939

Mediant MSBR

Example

This example sets active slots 2, 4 and 17, 18, 19 on t1 port 0/0.

(conf-if-t1 0/0)# channel-group 2, 4, 17-19

73.4.14.2 clock-source

This command specifies the clock source on the current T1 interface.

Syntax

clock-source <source>

Command Description

<source> Defines the source of the clock:

 ‘internal’ – clock is taken locally from WIC itself

 ‘line’ – clock is taken from the line i.e., from the remote

side

Default

By default, the clock source is ‘line’.

Command Mode

Privileged User

Example

This example sets clock source to the internally generated on T1 Port 0/1:

(conf-if-t1 0/1)# clock-source internal

73.4.14.3 framing-method

This command specifies the framing method on the current T1 interface.

Syntax

framing-method <framing mode>

Command Description

<framing mode> Defines the framing method:

 ‘esf’ – extended super frame (F24)

 ‘sf’ – superframe (D4)

Default

By default, the framing method is ‘esf’.

Other manuals for AudioCodes Mediant MSBR Series

Need help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

General