AudioCodes Mediant MSBR Series User Manual

Reference Guide 144 Document #: LTRT-17939
Mediant MSBR
6.7 show running-config
This command displays the device's current configuration.
Syntax
show running-config
Command Description
(Carriage Return) Displays the device's full configuration in the format of a CLI
command script. You can copy and paste the displayed output
in a text-based file (e.g., using Notepad), and then upload the
file to another device, or the same device if you want to make
configuration changes, as a CLI script file.
> <URL
Destination>
Sends the device's configuration in CLI script format, as a file
to a remote destination defined by a URL (TFTP, HTTP or
HTTPS).
data
Displays the device's data configuration (config-data).
full [> <URL
Destination>]
Displays the device's configuration as well as default
configuration settings that were not actively set by the user. In
regular mode, only configuration that is not equal to the default
is displayed. Can also send the configuration in CLI script
format, as a file to a remote destination defined by a URL
(TFTP, HTTP or HTTPS).
network
Displays the device's network configuration (config-network).
no-switchports
Displays the device's current configuration without LAN
switchports (config-no-switchports).
system
Displays the device's system configuration (config-system).
troubleshoot
Displays the device's troubleshoot configuration (config-
troubleshoot).
voip
Displays the device's VoIP configuration (config-voip).
Command Mode
Basic User and Privileged User
Example
Sending configuration to an HTTP server:
show running-config> http://10.9.9.9

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English