Reference Guide 6. Show Commands
Version 7.2 99 Mediant MSBR
This command displays the configuration of a set of interfaces in a backup group.
Syntax
show data backup-group
Command Mode
Basic User and Privileged User
Related Commands
(config-data)backup-group
Note
This command is applicable only to data-router functionality.
Example
This example displays the configuration of a set of interfaces in a backup group:
show data backup-group
Group Name: WAN_BACKUP_GROUP
Priority 1 GigabitEthernet 0/0
Priority 2 Fiber 0/1
Priority 3
Currently active interface: GigabitEthernet 0/0
To Next Page
Loading...
