Version 7.2 407 Mediant MSBR
Reference Guide 61. interface
Command Description
Call Rerouting Mode for Trunk.
Sets the CAS Protocol Table index per channel.
cas-delimiters-types
Defines the digits string delimiter padding usage for the
specific trunk.
cas-dial-plan-name
Sets the Dial Plan name that will be used on the specific
trunk.
cas-table-index
Indicates the CAS Protocol file to be used on the specific
Trunk.
Selects the trunk clock source.
Sets the trunk priority for auto-clock fallback.
Setting Digital OOS Behavior
framing
Selects the physical framing method to be used for this
trunk.
isdn-bits-cc-behavior
Sets the ISDN Call Control Layer (Layer 4) behavior
options.
isdn-bits-incoming-
Sets the ISDN incoming calls behavior options.
Sets the ISDN Network Layer (Layer 3) behavior options.
isdn-bits-ns-
Sets additional ISDN Network Layer (Layer 3) behavior
options.
isdn-bits-outgoing-
Sets the ISDN outgoing calls behavior options.
isdn-nfas-dchannel-
Sets the ISDN NFAS D-channel type.
Indicates the group number of the ISDN NFAS group.
isdn-nfas-interface-id
Sets the ISDN NFAS Interface ID. Applicable only if the
NS_EXPLICIT_INTERFACE_ID behavior bit is set.
Sets the ISDN termination side.
Send transfer capability to ISDN side on setup message.
Selects the line build out loss to be used for this trunk.
line-build-out-
Overwrites the Framer's XPM register values which con
the line pulse shape.
line-build-out-xpm0
Controls the Framer's XPM0 register value (line pulse
shape control).
line-build-out-xpm1
Controls the Framer's XPM1 register value (line pulse
shape control).
line-build-out-xpm2
Controls the Framer's XPM2 register value (line pulse
shape control).
Selects the line code type to be used for this trunk.
local-isdn-rbt-src
If the ringback tone source is not IP, who should supply the
Ringback tone.