EasyManuals Logo

AudioCodes Mediant MSBR Series User Manual

AudioCodes Mediant MSBR Series
801 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #349 background imageLoading...
Page #349 background image
Version 7.2 349 Mediant MSBR
Reference Guide 58. coders-and-profiles
Command Description
sbc-rmt-rfc3960-supp
Configures the SBC remote RFC 3960 gateway model
support.
sbc-rmt-rprsntation
Configures
how to represent the SBC's contact information
to the remote side.
sbc-rmt-update-supp
Configures SBC remote update support.
sbc-rtcp-feedback
Configures RTCP feedback support.
sbc-rtcp-mode
Configures the SBC RTCP mode.
sbc-rtcp-mux
Configures support of RTP-RTCP multiplexing.
sbc-rtp-red-behav
Configures SBC RTP redundancy behavior.
sbc-sdp-handle-rtcp
Configures SBC SDP Handle RTCP.
sbc-sdp-ptime-ans
Configures SBC SDP Ptime answer.
sbc-sdp-remove-crypto-
lifetime
Configures SBC SDP Remove Crypto Lifetime.
sbc-send-multiple-
dtmf-methods
Enables the <device> to send DTMF digits out-of-band
(not with audio stream) using both the SIP INFO and RFC
2833 methods for the same call on the leg to which this IP
Profile is associated.
sbc-session-expires-
mode
Configures SBC benavior with 'Session-Expires' header.
sbc-use-silence-supp
Configures SBC to use Silence Suppression.
sbc-usr-reg-time
Configures the duration (in seconds) of the periodic
registrations between the user and the device (the device
responds with this value to the user).
sbc-usr-tcp-nat-reg-
time
Configures the duration (in seconds) of the periodic
registrations between the user and the device when the
user registers over TCP and is behind NAT.
sbc-usr-udp-nat-reg-
time
Configures the duration (in seconds) of the periodic
registrations between the user and the device when the
user registers over UDP and is behind NAT.
sbc-voice-quality-
enhancement
Activates Voice Quality Enhancement.
second-tx-dtmf-option
Configures the second priority DTMF methods, offered
during the SIP negotiation.
signaling-diffserv
Configures the SIP Signaling DiffServ.
transcoding-mode
Configures the voice transcoding mode between the two
SBC legs for the SBC application.
voice-volume
Configures the voice TDM output gain.
vxx-transport-type
Configures the Vxx modem transport type.
Command Mode
Privileged User

Table of Contents

Other manuals for AudioCodes Mediant MSBR Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes Mediant MSBR Series and is the answer not in the manual?

AudioCodes Mediant MSBR Series Specifications

General IconGeneral
BrandAudioCodes
ModelMediant MSBR Series
CategoryNetwork Router
LanguageEnglish

Related product manuals