AudioCodes Mediant MSBR Series User Manual

Reference Guide 564 Document #: LTRT-17939
Mediant MSBR
74.2.3.5.1 boot-file-name
This command defines the name of the configuration file that the DHCP client should
download from the TFTP server on the specified interface.
Syntax
boot-file-name <boot file name>
no boot-file-name
Command Description
boot file name
Specifies the name of the configuration file that the DHCP client
should download from the TFTP server. This parameter is
optional. (BOOTP / DHCP Option 67).
Default
NA
Functional notes
NA
Command Mode
Privileged User
Related Commands
This command is also available from the interface configuration sub-directory.
See ip dhcp-server on page 554.
Example
This example sets the name of the configuration file that should be downloaded.
(dhcp-conf-VLAN 5)# boot-file-name my-config
This example clears this parameter.
(dhcp-conf-VLAN 5)# no boot-file-name

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English