Reference Guide 416 Document #: LTRT-17939
Mediant MSBR
Command Description
enhanced-redundancy-
Defines the number of repetitions to be applied to control
packets when using T.38 standard.
fax-cng-mode
0-Does not send a SIP re-INVITE, 1-Sends T.38 re-
upon detection of fax CNG tone, 2-Sends T.38 re-INVITE
upon detection of fax CNG tone or v8-cn signal
fax-transport-mode
{bypass|disable|events
Defines the Fax over IP transport method.
max-rate
Limits the maximum transfer rate of the fax during T.38
Fax Relay session.
modem-bypass-output-
Defines the modem bypass output gain [dB].
packing-factor
Defines the number of 20 msec payloads to be generated
in a single RTP fax/modem bypass packet.
redundancy-depth
Determines the depth of redundancy for non-
packets.
sprt-transport-
channel0-max-payload-
Defines the V.150.1 SPRT transport channel 0 max
payload size.
sprt-transport-
channel2-max-payload-
Defines the V.150.1 SPRT transport channel 2 max
payload size.
sprt-transport-
channel2-max-window-
Defines the V.150.1 SPRT transport channel 2 max
window size.
sprt-transport-
channel3-max-payload-
Defines the V.150.1 SPRT transport channel 3 max
payload size.
Defines the V.150.1 SSE redundancy depth.
v1501-sse-payload-
Defines the received V.1501.1 SSE RTP payload type.
v21-modem-transport-
Sets the V.21 modem transport method.
v22-modem-transport-
Defines the V.22 modem transport method.
v23-modem-transport-
Defines the V.23 modem transport method.
v32-modem-transport-
Defines the V.32 modem transport method.
v34-modem-transport-
Defines the V.34 modem transport method.
Defines the T.38 fax relay version.
Command Mode
Privileged User