Version 7.2 369 Mediant MSBR
Reference Guide 59. gateway
Command Description
MLPP Default Service Domain String (6 Hex Digits).
MLPP Normalized Service Domain String (6 Hex Digits).
mlpp-nwrk-id
Sets the Network identifier value which is represented as
the first 2 octets in the MLPP service domain field. values
are [1-999].
Enable/Disable MRD CAS behavior.
Maximum length used for bundling syslog at debug level 7.
Enables NI2 calling party category translation to SIP.
notification-ip-group-
IP Group ID for notification purposes.
Add NPI and TON as prefix to Redirect number.
number-type-and-plan
If selected, ISDN Type & Plan relayed from IP. Otherwise,
ISDN Type & Plan are set to 'Unknown'.
Enables Overlap mode.
Progress Indicator for ISDN Setup Message.
Play local RBT on TBCT/ECT/RLT transfer.
play-rb-tone-xfer-
Play RB tone on transfer success.
Preemption Tone Duration.
Prefix to dial for external line.
q850-reason-code-
Q850 Reason Code which cause playing special PRT
Tone.
qsig-path-replacement
0 - Enable IP to QSIG transfer,1 - Enable QSIG to IP
Transfer
Enables QSIG Tunneling over SIP.
Enable QSIG Transfer Update.
r2-for-brazil-telecom
Enable Interworking of Calling Party Category (cpc) from
sip INVITE to MFCR2 category for Brazil Telecom.
Send re-INVITE after 181 with new SRTP keys.
replace-tel-to-ip-
Maximum Time to wait between call setup and Facility with
Redirecting Number for replacing calling number (msec).
restarts-after-so
Enable sending restarts to PSTN on channels experienced
mismatch in CONNID usage.
rls-ip-to-isdn-on-pro-
cause
Defines whether to disconnect call while receiving ISDN
PROGRESS with Cause 0 -never, 1- disconnect if not
Early media,2 - always
If set to 1 - Removes Calling Name from IP->TEL calls.
rmv-cli-when-restr
Removes CLI from IP->TEL calls if received CLI is
restricted