Reference Guide 368 Document #: LTRT-17939
Mediant MSBR
Command Description
Use endpoint number as calling number for IP-to-Tel.
Use endpoint number as calling number for Tel-to-IP.
etsi-diversion
Use supplementary service ETSI
Diverting Leg Information
2 to send redirect number.
fallback-transfer-to-
Disable fallback from ISDN call transfer to TDM.
fax-rerouting-delay
Defines the time interval (in sec) to wait for CNG detection
to re-route call to fax destinations.
fax-rerouting-mode
Enables the detection of the fax CNG tone in incoming
calls, before sending the INVITE.
first-call-waiting-
Defines the index of the first Call Waiting tone in the Call
Progress Tones file.
format-dst-phone-
-
Uses the software watchdog for gateway tasks.
Defines gateway H.323-ID source field.
ign-isdn-disc-w-pi
Enable ignoring of ISDN Disconnect messages with PI 1 or
8.
ignore-alert-after-
Interwork of Alert from ISDN to SIP.
Ignore LOS alarms for BRI user side trunk.
IP to CAS list of ANI and DNIS delimiters.
Enable ISDN Facility Trace.
ISDN SubAdress format.
Enable ISDN Tunneling IP to Tel.
Enable ISDN Tunneling Tel to IP.
isdn-trsfr-on-conn
Send TBCT/ECT/RLT request only when second leg call is
connected.
isdn-xfer-complete-
If such a cause received in ISDN DISCONNECT message
of the first leg, NOTIFY 200 is sent toward IP.
ISO 8859 Character Set Part.
isub-number-of-digits
Number of digits that will be taken from end of phone
number as Subaddress.
local-time-on-connect
0 - Don't Send Local Date and Time,1 - Send Local Date
and Time Only If Missing,2 - Always Send Local Date and
Time
Limit the maximum length in KB for SIP message.
Select the preference of Media IP version.
MFC/R2 Calling Party's category.
Enable MFC-R2 protocol debug.
MLPP Default Namespace.
To Next Page
Loading...
Need help?
General
