Reference Guide 120 Document #: LTRT-17939
Mediant MSBR
Command Description
ï‚§
pool (Displays DHCP pools
information)
ï‚§ zone (Displays DHCP server zones)
dhcp-server all
Displays information on all DHCP server
interfaces.
extcommunity-list
Displays information about the Extended
Community Lists.
firewall {max-conn-
statistics|states}
Displays firewall statistics:
firewall max-conn-statistics
{last-72-hours|last-hour}
Displays firewall states:
fullpath-profiler
Displays all IP connections.
igmp proxy {groups} {lan-
interface <atm|bvi|cellular|
dot11radio|efm|fiber|
gigabitethernet|gre|ipip|
ipipv6|ipv6ip|l2tp|loopback|
pppoe|pptp|vlan|vti>} {lan-
interfaces}
Displays information about IGMP (Internet
Group Management Protocol) which is
used by hosts and adjacent routers on
IPv4 networks to establish multicast group
memberships.
interface
{brief|atm|bvi|cellular|dot11ra
dio|efm|fiber|gigabitethernet|g
re|ipip|ipipv6|ipv6ip|l2tp|loop
back|pppoe|pptp|vlan|vti|rates}
Displays the status of each IPv4 interface.
'brief' displays a brief summary of all
statuses.
mroute
{active|interfaces|summary|
vrf <VRF Table Name>}
Displays the multicast route table entries.
ï‚§ active (Displays active multicast
sources)
ï‚§ interfaces (Displays information about
the multicast route interface)
ï‚§ summary (Displays a summary of the
multicast route table entries)
ï‚§ vrf (Displays information about the
multicast route table entries per VRF
(Virtual Routing and Forwarding) table,
according to the name of the VRF
table)
nat {activity
<rates|refreshing>
|brief|pools|rules|
translations}
Displays the NAT (Network Address
Translation) connections.
ï‚§ activity (Displays NAT activity - top
connections)
rates (Displays NAT activity and
statistics - with rate details)
refreshing (Displays NAT activity
and statistics – with auto-
refreshing). To stop the refreshing
(if you choose the refreshing
option): Press Ctrl+C.111