AudioCodes Mediant MSBR Series User Manual

Reference Guide 6. Show Commands
Version 7.2 121 Mediant MSBR
Command Description
 brief (Displays IP NAT summary)
 pools (Displays IP NAT pools)
 rules (Displays IP NAT rules)
 translations (Displays currently active
translations)
ospf {border-
routers|database|interface|neig
hbor<[A.B.C.D]|all|atm|bvi|cell
ular|dot11radio|efm|fiber|gigab
itethernet|gre|ipip|ipipv6|ipv6
ip|l2tp|loopback|pppoe|pptp|vla
n>|route|vrf}
Displays Open Shortest Path First
(OSPF).
pim {bsr-
router|groups|interfaces|rp|vrf
}
Displays information about PIM (Protocol
Independent Multicast) used by the
MSBR to dynamically create a multicast
distribution tree.
port-map
Displays information about the MSBR's
port-to-application mapping.
port-triggering
Displays information about TFTP and
L2TP port-triggering.
prefix-list {<Prefix List
Name>|detail|summary|vrf}
Displays information about the IPv4
prefix-based filtering mechanism.
rip {status|vrf<VRF Table
Name>}
Displays information about Routing
Information Protocol (RIP).
route {<A.B.C.D>|bgp|connected|
kernel|ospf|rip|static|summary|
supernets-only|vrf<VRF Table
Name>}
Displays information about the IP routing
tables.
vrf <VRF Table Name>
Displays information about the IP data
routing status for a specified VRF table.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays information on all DHCP server interfaces:
show data ip dhcp-server all
DHCP relay server of interface BVI 1 :
Relay Server is disabled.
DHCP relay server of interface VLAN 1 :
Relay Server is disabled.
DHCP relay server of interface dot11radio 1 :

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English