Reference Guide 114 Document #: LTRT-17939
Mediant MSBR
Command Description
show data f-path
Displays throughput counters of traffic using fast-path or
full-path.
show data f-path
rate refreshing
Displays throughput counters of traffic using fast-path or
full-path, and refreshes the output every three seconds
until the CTRL+C keys are pressed.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays the output of the command:
# sh data f-path rate refreshing
15-seconds Fastpath rate: 430 pps, 0 bps
5-minutes Fastpath rate: 445 pps, 0 bps
15-seconds fullpath rate: 475 pps, 1476 Kbps
5-minutes fullpath rate: 460 pps, 1494 Kbps
To Next Page
Loading...
