AudioCodes Mediant MSBR Series

Reference Guide 6. Show Commands
Version 7.2 125 Mediant MSBR
Command Description
dot11radio|efm|fiber|gigabitethernet|
gre|ipip|ipipv6|ipv6ip|l2tp|loopback|
pppoe|pptp|vlan|prefix>|linkstate<detai
l
|network router>|neighbor<detail|
drchoice>|redistribute|route<IP Version
6 Address in X:X::X:X
format|detail|external-1|external-
2|inter-area|intra-
area|summary>|simulate<SPF
Tree>|spf<SPF Tree>|vrf<VRF Table
Name>}
prefix-list {Prefix List Name|detail|
summary|vrf}
Displays a prefix list.
ripng {status|vrf<VRF Table Name>}
Displays RIPng (RIP next
generation) routes.
route {<IP Version 6 address / prefix
in the routing table to display, in
X:X::X:X/M
format>|bgp|connected|kernel|ospf6|ripn
g|static|summary|vrf<VRF Table Name>}
Displays the IP Version 6
routing table.
Command Mode
Basic User and Privileged User
Note
This command is applicable only to data-router functionality.
Example
This example displays the IP Version 6 routing table associated with BGP:
show data ipv6 route bgp
Codes: K - kernel route, C - connected, S - static,
R - RIPng, O - OSPFv6, B - BGP