AudioCodes Mediant MSBR Series

Reference Guide 250 Document #: LTRT-17939
Mediant MSBR
Command Description
enable-mgmt-login
{off|on}
Uses RADIUS for authentication of management
interface access.
local-cache-mode
{0|1}
Configures the capability to reset the expiry time of the
local RADIUS password cache.
local-cache-timeout
Configures the expiry time, in seconds
of the locally
stored RADIUS password cache.
nas-id-attribute
Configures the RADIUS NAS Identifier attribute.
timeout-behavior
Configures device behavior when RADIUS times out.
vsa-access-level
Configures the 'Security Access Level' attribute code in
the VSA section of the RADIUS packet that the device
should relate to.
vsa-vendor-id
Configures the vendor ID that the device should accept
when parsing a RADIUS response packet.
Command Mode
Privileged User
Example
This example demonstrates configuring VSA vendor ID:
(config-system)# radius settings
(radius)# vsa-vendor-id 5003