AudioCodes Mediant MSBR Series User Manual

Version 7.2 419 Mediant MSBR
Reference Guide 63. media
Command Description
com-noise-gen-nego
CN payload type is used and being negotiate
disable-rtcp-
randomization
Defines the RTCP report intervals.
fax-bypass-payload-
type
Defines the Fax Bypass (VBD) Mode payload type.
jitter-buffer-minimum-
delay
Defines the Dynamic Jitter Buffer Minimum Delay [msec]
jitter-buffer-
optimization-factor
Defines the Dynamic Jitter Buffer attack/decay
performance.
modem-bypass-payload-
type
Defines the Modem Bypass (VBD) Payload type.
publication-ip-group-
id
Defines the IP Group to where the <device> sends RTCP
XR reports.
remote-rtp-b-udp-prt
Defines the Remote Base UDP Port For Aggregation
rtcp-interval
Defines the time interval between the adjacent RTCP
report (in msec).
rtcp-xr-coll-srvr
Defines the RTCP-XR server IP address
rtcp-xr-rep-mode
0:rtcpxr is not sent over SIP at all{@}1:rtcpxr is sent over
sip when call ended{@}2:rtcpxr is sent over sip when on
periodic interval and when call ended{@}3:rtcpxr is sent
over sip when media segment ended and when call ended
rtcpxr-collect-serv-
transport
Defines the RtcpXrEsc transport type
rtp-redundancy-depth
Defines the redundancy depth of RTP redundancy
packets.
rtp-redundancy-
payload-type
Defines the RTP Redundancy packet's Payload Type field.
sbc-rtcpxr-report-mode
0:rtcpxr is not sent over SIP at all,1:rtcpxr is sent over sip
when call ended
udp-port-spacing
{10|4|5}
Defines the UDP port spacing.
voice-quality-
monitoring-enable
Defines the voice quality monitoring (RTCP-XR) mode.
Command Mode
Privileged User
Example
This example configures UDP port spacing:
(config-voip)# media rtp-rtcp
(media-rtp-rtcp)# udp-port-spacing 5
(media-rtp-rtcp)# activate

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English