Version 7.2 555 Mediant MSBR
Reference Guide 74. Layer-2 (LAN) Commands
# ip dhcp-server provide-host-name
# no ip dhcp-server provide-host-name
# ip dhcp-server sip-server <FQDN of SIP server – Option 120)
# ip dhcp-server lync-cert-provisioning <Microsoft Lync Server
Certificate Provisioning service – Option 43>
Command Description
ip address Specifies a valid IPv4 address. IP addresses should be
expressed in dotted decimal notation (for example,
10.1.2.3).
Specifies a valid IPv4 address for the DHCP relay
server.
first ip address
last ip address
subnet mask
Specifies the address pool of the DHCP relay server
(valid IPv4 address). IP addresses should be
expressed in dotted decimal notation.
dns ip address Specifies a valid IPv4 address for the dns server. IP
addresses should be expressed in dotted decimal
notation (for example, 10.1.2.3). This parameter is
optional.
wins ip address Specifies a valid IPv4 address for wins server. IP
addresses should be expressed in dotted decimal
notation (for example, 10.1.2.3). This parameter is
optional.
days
hours
minutes
Specifies the number of days and/or hours and/or
minutes for server leases. This parameter is optional
(default is 1 hour).
boot file name Specifies the name of the configuration file that the
DHCP client should download from the TFTP server.
This parameter is optional. (BOOTP / DHCP Option
67).
domain name Specifies the domain name that client should use when
resolving hostnames via DNS. This parameter is
optional. (BOOTP / DHCP Option 15).
wins node type
Specifies the NetBIOS (WINS) node type (i.e. 1 = B-
node, 2 = P-node, 4 = M-node, 8 = H-node). This
parameter is optional. (BOOTP / DHCP Option 46).
ntp ip address Specifies a valid IPv4 address for NTP server. IP
addresses should be expressed in dotted decimal
notation (for example, 10.1.2.3). This parameter is
optional. (BOOTP / DHCP Option 42).
tftp ip address Specifies a valid IPv4 address for TFTP server. IP
addresses should be expressed in dotted decimal
notation (for example, 10.1.2.3). This parameter is
optional. (BOOTP / DHCP Option 150).
tftp name Specifies a TFTP server name. This parameter is
optional. (BOOTP / DHCP Option 66).