AudioCodes Mediant MSBR Series User Manual

Version 7.2 569 Mediant MSBR
Reference Guide 74. Layer-2 (LAN) Commands
Command Description
<first ip> First IP address in the range for this pool.
Specifies a valid IPv4 address. IP addresses should be
expressed in dotted decimal notation (for example,
10.1.2.3).
<last ip> Last IP address in the range for this pool.
Specifies a valid IPv4 address. IP addresses should be
expressed in dotted decimal notation (for example,
10.1.2.3).
<mask> Specifies the subnet mask that corresponds to a range of
IP addresses. Subnet masks should be expressed in
dotted decimal notation (for example, 255.255.255.0).
Default
NA
Related Commands
This command is also available from the interface configuration sub-directory.
Command Mode
Privileged User
Example
This example enters ip dhcp pool on VLAN 5 and sets the Network addresses and mask for
the pool.
(dhcp-conf-VLAN 5)#network 10.4.60.1 10.4.60.5 255.255.0.0
74.2.3.5.8 override-router-address
This command overrides the router address assigned to the DHCP pool on the specified
interface.
Syntax
override-router-address <IP Address>
Command Description
<ip address>
Speci
fies a valid IPv4 address. IP addresses
should be expressed in dotted decimal notation
(e.g., 10.1.2.3).
Default
NA

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English