Version 7.2 571 Mediant MSBR
Reference Guide 74. Layer-2 (LAN) Commands
74.2.3.5.10 tftp-server
This command defines a TFTP server assigned to the DHCP pool on the specified interface.
Syntax
tftp-server <tftp ip address>
Command Description
tftp ip address Specifies a valid IPv4 address for TFTP server. IP
addresses should be expressed in dotted decimal notation
(for example, 10.1.2.3). This parameter is optional.
(BOOTP / DHCP Option 150).
Default
NA
Functional notes
NA
Command Mode
Privileged User
Related Commands
This command is also available from the interface configuration sub-directory.
See ip dhcp-server on page 554.
Example
This example sets the TFTP server IP address.
(dhcp-conf-VLAN 5)# tftp-server 10.4.4.1
74.2.3.5.11 tftp-server-name
This command defines a TFTP server name assigned to the DHCP pool on the specified
interface.
Syntax
tftp-server-name <tftp name>
no tftp-server-name
Command Description
tftp name Specifies a TFTP server name. This parameter is optional.
(BOOTP / DHCP Option 66).