Version 7.2 601 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Interface Type (ifname) Interface ID
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Interface Description
a.b.c.d Defines the IP address.
Note
This command is applicable only to data-router functionality.
IPv6 support is available only if the installed Software License Key contains the IPv6
Feature Key.
Command Mode
Privileged User
Example
This example configures an IPv6 static route.
(config-data)# ipv6 route 2001:10::/64 2050:8::
GigabitEthernet 0/0 1
The IPv6 static route can be displayed using the regular show running-config
command or the following new IPv6 command:
# show data ipv6 route [<ipv6-address[prefix]>] [connected]
[kernel] [static] [summary]