Reference Guide 630 Document #: LTRT-17939
Mediant MSBR
Command Description
MSBR in single network mode can also be set with local-
voip to define the route source address to all VoIP
packets generated locally by the MSBR
IP source prefix Defines the ip destination prefix (a.b.c.d/p)
next-hop Defines the next hop for routing
metric value Defines the metric (priority) value for this route (0-255).
track id Defines the track ID (1-100).
output-vrf Defines the output vrf name for route leaking between
vrfs.
bfd-neighbor Defines the ID of a BFD neighbor to attach the route to.
desciption Define a description name for this route
Interface Type (ifname) Interface ID
gigabitethernet
GigabitEthernet interface slot
and port (VLAN ID is optional)
[SLOT/PORT.VLANID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Note
This command is applicable to Mediant MSBR devices.
Command Mode
Privileged User
Example
The following are examples of how this command can be used:
(config-data) # ip route source 10.3.0.0/16 destination 0.0.0.0/0
10.4.5.0 gre 18 track 10
To Next Page
Loading...
