AudioCodes Mediant MSBR Series User Manual

Version 7.2 639 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Syntax
Sets static RP address for router, should be configured on all related PIM routers.
ip pim rp-address <ip> group <Multicast group prefix>
Sets router to be a candidate RP, chosen by priority.
Sets router to be a candidate RP, Advertising Interval in seconds.
When the interface is used, the RP candidate will be set to interface IP.
ip pim rp-candidate {IP|Interface} priority <0-255> time <0-3600>
Sets router to be a BSR candidate, chosen by priority when Interface is used – the BSR
candidate will be set to interface IP.
ip pim bsr-candidate {IP|Interface} priority <0-255>
Sets threshold for moving to shortest path tree between the multicast server and the client.
 infinity - Never switch to shortest path
 packets – Move to shortest path tree when number of packets threshold was crossed
during the specified interval
 rate - Move to shortest path tree when packet rate threshold was crossed during the
specified interval
ip pim spt-threshold infinity
OR
ip pim spt-threshold packets <number of packets> interval <sec>
OR
ip pim spt-threshold rate <kpps> interval <sec>
Default
NA
Command Mode
Privileged User
Example
This is an example of how this command can be used.
(config data) ip pim rp-address 10.12.15.91 group 100.1012.15

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English