AudioCodes Mediant MSBR Series User Manual

Version 7.2 677 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Syntax
neighbor {<neighbor tag>|a.b.c.d|X:X::X:X} interface <if name>
<interface ID>
Command Description
a.b.c.d|X:X::X:X Defines the IP address of the neighbor (IPv4 or IPv6).
neighbor tag Defines the neighbor tag.
Interface Type (ifname) Interface ID
gigabitethernet GigabitEthernet interface slot
and port (VLAN ID is optional)
[SLOT/PORT.VLANID]
cellular Cellular interface ID 0/0
gre Tunnel GRE ID [1-255]
ipip Tunnel IPIP ID [1-255]
l2tp L2TP ID [0-99]
pppoe PPPoE interface ID [1-3]
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Command Mode
Privileged User
Example
The following is an example of how to use this command.
(config-data)# router bgp 1
(conf-router)# neighbor 10.12.5.10 interface gre 100

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English