AudioCodes Mediant MSBR Series - Page 697

Version 7.2 697 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Default
NA
Command Mode
Privileged User
Example
This example configures the area to be a stub area.
(config-data)# router ospf
(conf-router)# area number 1000 stub
75.2.2.79.2.15 area ip-address|number stub no-summary
This command prevents an OSPFD ABR from injecting inter-area summaries into the
specified stub area.
Syntax
area ip-address <a.b.c.d> stub no-summary
area number number stub no-summary
no area ip-address <a.b.c.d> stub no-summary
no area number number stub no-summary
Command Description
a.b.c.d Defines the OSPF area in IP address format
number Defines the OSPF area ID as a decimal value in the range
of 0 – 4294967295.
no-summary Determines not to inject inter-area routes into the stub.
Default
NA
Command Mode
Privileged User
Example
This example prevents an OSPFD ABR from injecting inter-area summaries into the specified
stub area.
(config-data)# router ospf
(conf-router)# area number 1000 stub no-summary