Version 7.2 699 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Command Description
NAME Defines the IP prefix list name.
in Filters networks – sent out to this area
out Filters networks – sent out from this area
Default
NA
Command Mode
Privileged User
Example
This example filters Type-3 summary-LSAs to/from area using prefix lists.
(config-data)# router ospf
(conf-router)# area number 1000 filter-list prefix NAME in
75.2.2.79.2.18 area ip-address|number authentication
This command specifies that simple password authentication should be used for the given
area.
Syntax
area ip-address <a.b.c.d> authentication
area number number authentication
no area ip-address <a.b.c.d> authentication
no area number number authentication
Command Description
a.b.c.d Defines the OSPF area in IP address format.
number Defines the area number in the range of 0 – 4294967295.
Default
NA
Command Mode
Privileged User
Example
This example specifies that simple password authentication should be used for the given
area.
(config-data)# router ospf