AudioCodes Mediant MSBR Series - Page 701

Version 7.2 701 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Command Description
1|2 Sets the OSPF exterior type - 1- metric, 2-metrics
word Describes the pointer to route-map entries
Default
NA
Command Mode
Privileged User
Example
This example redistributes routes of the specified protocol or kind into OSPF.
(config-data)# router ospf
(conf-router)# redistribute kernel
75.2.2.79.2.21 redistribute rip
This command redistributes information from RIP.
Syntax
redistribute rip [metric <default metric>] [route-map <pointer>]
redistribute rip [route-map <pointer>][metric <default metric>]
no redistribute rip
Command Description
metric Defines the metric for redistributed routes.
default metric Defines the default metric [0-4294967295].
route-map Defines the route map reference.
pointer Defines the pointer to route-map entries.
Default
NA
Command Mode
Privileged User
Example
This example redistributes routes from RIP.
(config-data)# router bgp 3
(conf-router)# redistribute rip