AudioCodes Mediant MSBR Series - Page 725

Version 7.2 725 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Interface Type (ifname) Interface ID
pptp PPTP ID [0-99]
vlan Vlan ID [1-3999]
loopback Loopback ID [1-5]
bvi Bridge interface [1-255]
Default
NA
Command Mode
Privileged User
Example
This example filters the RIP path for input packets of vlan 1.
(conf-router)# distribute-list prefix prefix1 in vlan 1
75.2.2.81.2.12 distance
This command sets the default RIP distance to a specified value.
Syntax
distance <1-255> [a.b.c.d/m]
no distance <1-255> [a.b.c.d/m]
Command Description
a.b.c.d/m Defines the IP prefix network/length.
Default
120
Command Mode
Privileged User
Example
This example sets the default RIP distance to 150.
(conf-router)# distance 150
75.2.2.81.2.13 timers basic
This command configures timers in the RIP protocol.
The no timers basic command resets the timers to the default settings listed below.