AudioCodes Mediant MSBR Series - Page 733

Version 7.2 733 Mediant MSBR
Reference Guide 75. Layer-3 Commands
Example
This example sets a BGP community list.
(config-data)# route-map ww permit 1
(conf-route-map)# set comm-list 100
75.2.2.81.4.8 set ip next-hop
This command sets the next hop value in the RIPv2 protocol.
Syntax
set ip next-hop a.b.c.d
Command Description
a.b.c.d Defines the IP address.
Command Mode
Privileged User
Example
This example sets the next hop to 10.4.4.28.
(conf-route-map)# set ip next-hop 10.4.4.28
75.2.2.81.4.9 set metric
This command sets a metric value for matched routes when sending an announcement.
Syntax
set metric <0-4294967295>
Command Mode
Privileged User
Example
This example sets the metric value to 150000.
(conf-route-map)# match metric 150000
75.2.2.81.4.10 redistribute connected
This command redistributes connected routes into the RIPng tables.
The no redistribute connected command disables the connected routes in the RIP
tables. The connected route on a RIP- enabled interface is announced by default.