AudioCodes Mediant MSBR Series

Reference Guide 744 Document #: LTRT-17939
Mediant MSBR
Command Description
string Defines the VRF name.
Default
Interface is not associated with vrf.
Note
 This command is supported on all MSBR devices.
 The maximum number of interfaces per vrf is 20.
 The following interfaces are supported:
 GigabitEthernet
 cellular
 gre
 ipip
 atm
 pppoe
 multilink
 vlan
Command Mode
Privileged User
Related Commands
ip vrf, show ip vrf
Example
This example associate interface VLAN 4 with vrf data:
# configure data
(config-data)# interface vlan 4
(conf-if-VLAN 4)# ip vrf forwarding data