HEIDENHAIN iTNC 530 HSCI - Page 495

July 2013 4.4 List of machine parameters 495
MP108.x Assignment of axes to drive-control motherboards
Input: 0 to 4: Number of drive-control motherboard in
the HSCI chain
RESET 615
MP109.x Assignment of spindle(s) to drive-control motherboards
Input: 0 to 4: Number of drive-control motherboard in
the HSCI chain
RESET 617
MP110.x Assignment of position encoder inputs to the axes
Input: 0: No position encoder input
1 to 6: Position encoder inputs X1 to X6
35 to 38: Position encoder inputs X35 to X38
201 to 214: Position encoder inputs X201 to X214
RESET 615
MP111.x Position encoder input for the spindle/spindles
Input: 0: No position encoder input
1 to 6: Position encoder inputs X1 to X6
35 to 38: Position encoder inputs X35 to X38
201 to 214: Position encoder inputs X201 to X214
REF 617,
948
MP111.0 Position encoder input for the first spindle
MP111.1 Position encoder input for the second spindle
MP112.x Assignment of speed encoder inputs to the axes
Input: 0: No speed encoder input
15 to 20: Speed encoder inputs X15 to X20
80 to 85: Speed encoder inputs X80 to X85
RESET 615
MP113.x Speed encoder for the spindle/spindles
Input: 0: No speed encoder input
15 to 20: Speed encoder inputs X15 to X20
80 to 85: Speed encoder inputs X80 to X85
REF 617
MP113.0 Speed encoder for the first spindle
MP113.1 Speed encoder for the second spindle
MP Function and input Software
version and
behavior
Page