July 2013 5.1 Overview of modules 589
9276
Write operand contents into the log
1297
9277 Write data into the OEM log 1297
9279 Control reset 1262
9280
Start the NC macro (Run pallet entry)
1501
9281 Select a line in the pallet table 1498
9282 Tool usage test for pallet table 1598
9283 Generate tool-usage file 60642x-03 1600
9285 Set the access level 1168
9286 Select the VNC client and control of the
focus assignment
60642x-03 1882
9287 General status requests regarding VNC
clients
60642x-03 1883
9288 Status requests regarding a VNC client 60642x-03 1885
9290 Select a file 1407
9291 Call an NC macro 1711
9300 Lock/release the pocket table 1589
9301 Find the number of an entry in the pocket
table
1591
9302 Search for a vacant pocket in the tool
magazine
1591
9304 Copy columns P1 to P5 to the pocket
table
1584
9305 Tool exchange in the pocket table 1590
9306 Exchange tools between tool magazines 1592
9310 Read the machine parameter from the
run-time memory
486
9311 Dynamically change values for friction
compensation
1107
9312 Change machine parameters in the
current machine parameter file
487
9313 Read machine parameters from current
machine parameter file
489
9314
Activate/Deactivate machine parameters
489
9320 Status of the NC program end 1213
9321 Find the current block number 1210
9322 Information of the current NC program 1211
9340 Search for a pocket depending on
magazine rules
1585
9341 Edit a pocket table depending on
magazine rules
1586
9342 Find magazine and pocket number 1587
9343 Compile and activate magazine rules 1588
9350 Read data from the tool table 1565
9351 Write data to tool table –
Module Function SW version Page
To Next Page
Loading...
