HP Latex 300 Series

Curing system: Fan 1 fault.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Replace module 1.
SE Code: 16.32:10 – Curing system: Fan 2 fault
Problem description:
Curing system: Fan 2 fault.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Replace module 2.
SE Code: 16.33:10 – Curing system: Fan 3 fault
Problem description:
Curing system: Fan 3 fault.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Replace module 3.
SE Code: 16.34:10 – Curing system: Fan 4 fault
Problem description:
Curing system: Fan 4 fault.
Corrective action:
Call agent:
▲
Restart the printer.
Service engineer:
▲
Replace module 4.
SE Code: 16.39:10 – Curing system: More than 1 fan failure
Problem description:
98 Chapter 3 System error codes ENWW